PABIAN VAN DEN HUL 반덴헐 INSPIRATION (SINGLE-WIRE)


*탄노이 레퍼런스 스피커케이블과 같은 케이블


* 기본길이-2m[페어]

  -다양한 길이옵션

*기본단자는 반덴헐 topline 바나나말굽교체형단자  https://pabian.kr/goods/view?no=3329



* 파비안 터미네이션


* 싱글와이어링 타입

*탄노이 스피커용으로는 접지케이블에 말굽단자가 추가됩니다.





↓아래는 케이블 INSPIRATION HYBRID(Halogen Free)설명입니다.

The INSPIRATION HYBRID(Halogen Free)

* 외경-11.5M

* 반덴헐 퓨전 테크놀러지 방식인 탄소+메탈의 하이브리드 방식

* 특별히 인터커넥터로도 사용 가능한 케이블

*3 중으로 설계된 두터운 쉴드와 그물망처럼 짜여진 차폐 쉴드선

* HULLIFLEX ® 4피복쟈켓

* 4심선으로 바이와이어링이 가능한 케이블

* 탄노이 레퍼런스 케이블에 사용된 케이블

* 구리+실버+아연 합금 컨덕터로 반덴헐 퓨전 테크놀러지 사용

★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★

* 현이나 보컬을 좋아하십니까?

* 달콤하고 감미로운 소리를 원하십니까?

* 다인오디오, 탄노이, 하베스, 스펜더, 소너스파베르, 로저스 등의 스피커와 같이 매칭하시면

  성악, 보컬, 현 등에서 정말로 최고의 소리를 들려줍니다.

* 순수원음 재생이 오디오의 목표이지만 이 케이블은 착색이 있습니다.

* 자연스러운 질감을 표출하면서 소리를 달콤하고 감미롭게 그리고 몽환적인 느낌으로

  바꾸어줍니다.

* 그렇다고 메가리 없이 풀어지거나 다이나믹스가 떨어지는 소리도 아닙니다.

  해상력이 떨어지지도 않습니다.

* 푹신한 소파에 기대앉아 들으시면 감미로운 음악이 휘감아 옵니다.

* 한번 느껴보십시오!

Description:

INSPIRATION HYBRID는 당사가 새롭게 개발한 첨단 FUSION 도체 재료를 통합한 오디오 인터커넥트 및 라우드스피커 케이블의 최첨단 FUSION 시리즈의 신제품입니다.

INSPIRATION HYBRID의 주요 응용 분야는 최고 품질의 트윈 리드 라우드스피커 케이블 역할을 하는 것이지만 바이와이어링, 바이앰핑 또는 인터커넥트에 사용할 때도 똑같이 뛰어납니다.
INSPIRATION HYBRID의 디자인은 일반적인 트윈 리드 라우드스피커 케이블에 비해 적용 범위를 넓히고 성능을 향상시키는 여러 가지 고유한 기능을 통합합니다.

케이블에는 무거운 실드가 장착되어 있습니다.
신호 리드는 소위 스타 쿼드 구성으로 배치됩니다.
케이블에는 해당하는 경우(*) 라우드스피커 캐비닛과 앰프 접지 사이의 접지 연결 역할을 하는 별도의 중앙 접지 리드가 포함되어 있습니다.
위에서 언급한 설계 기능은 라우드스피커 라인을 통해 들어오는 파워 앰프의 신호(피드백) 경로로 방사되는 외부 전자기 노이즈로 인해 발생할 수 있는 오디오 신호 간섭을 방지합니다.
또한 디지털(스위치 모드) 파워 앰프를 사용할 때 라우드스피커 라인에서 잔류 잡음이 방출되는 것을 방지합니다.
이와 같이 이러한 조치는 시스템의 노이즈 플로어를 낮추는 데 도움이 되므로 보다 자세한 정보를 표시할 수 있습니다.

(*) 비고: 일부 라우드스피커 제조업체는 현재 라우드스피커에 별도의 접지 연결을 갖추고 있습니다. Tannoy는 새로운 Dimension 범위인 TD-8, TD-10 및 TD-12를 선보이며 다른 제품도 출시할 예정입니다.

기능(계속):

연선 신호 라인은 당사가 새롭게 개발한 첨단 FUSION 전도체 재료로 만들어졌으며 Linear Structured Carbon ®을 포함하는 전도층에 내장되어 있습니다.
음향적 결과는 뛰어난 공간감을 지닌 매우 상세한 신호 전송입니다.
음향이 거칠거나 정의가 부족한 흔적이 없습니다.
케이블 전체의 재킷과 절연체는 뛰어난 보호 기능을 제공하는 매우 견고한 절연 재료인 HULLIFLEX ® 4로 만들어졌습니다.
듣고 영감을 얻으십시오!

추가 세부 정보:

INSPIRATION HYBRID에서 4개의 별 모양으로 구성된 쿼드 구성 신호 라인은 중앙 접지 리드를 둘러싸고 있습니다.
신호 라인은 쌍으로 결합되어 총 단면적이 2 x 3.94 mm²이고 저항이 2 x 1.4 Ohm/100 m인 트윈 리드 라우드스피커 케이블을 형성하도록 되어 있습니다.
중앙 접지 리드는 앰프와 라우드스피커의 접지 단자 사이의 선택적인 접지 연결 역할을 하기 위한 것입니다.
신호 라인의 스타 쿼드 구성 및 별도의 접지 리드 옆에 R.F. 간섭은 앰프 쪽에서 접지되고 라우드스피커 끝에서 분리된 상태로 두어야 하는 케이블의 두꺼운 편조 스크린에 의해 제공됩니다.

4개의 신호 라인이 있는 INSPIRATION HYBRID는 바이와이어링 또는 바이앰핑 라우드스피커 케이블로도 사용하기에 적합합니다.
(총 단면적: 4 x 1.97 mm², 저항: 4 x 2.8 Ohm/100 m).

The INSPIRATION HYBRID is a new product in our state of the art FUSION SERIES of audio interconnects and loudspeaker cables which incorporate our new developed highly advanced FUSION conductor material.

The INSPIRATION HYBRID’s main application area is to serve as a highest quality twin lead loudspeaker cable, though it equally exels when used for bi-wiring, bi-amping or as an interconnect.
The INSPIRATION HYBRID’s design incorporates a number of unique features which widen its field of application and improve performance compared to regular twin lead loudspeaker cables:

  1. The cable is equipped with a heavy shield.
  2. The signal leads are placed in a so-called star quad configuration.
  3. The cable contains a separate central ground lead which, if applicable (*), is intended to serve as ground connection between loudspeaker cabinet and amplifier ground.

The above mentioned design features avoid possible audio signal interference caused by external electromagnetic noise radiating into your power amplifier’s signal (feedback) path, entering through the loudspeaker lines.
Furthermore, when using digital (switchmode) power amplifiers, any radiation of residual noise from the loudspeaker lines is prevented.
As such, these measures help to keep your system’s noise floor down, thereby allowing it to reveal more detail.

(*) Remark: Some loudspeaker manufacturers now equip their loudspeakers with a separate ground connection: e.g. Tannoy with their new Dimension range TD-8, TD-10 and TD-12 and for sure others to come.

Features (continued):

  1. The stranded signal lines are made of our new developed highly advanced FUSION conductor material and are furthermore embedded in a conductive layer containing our Linear Structured Carbon ®.
    The sonic result is a very detailed signal transmission with a superb spacious character.
    There is no sign of any sonic harshness or lack of definition.
  2. The jacket and insulation throughout the cable are made of HULLIFLEX ® 4, a very rugged insulation material which provides outstanding protection.
Listen and be inspired !


Further details:

In The INSPIRATION HYBRID four star quad configured signal lines surround a central ground lead.
The signal lines are intended to be pairwise combined to form a twin lead loudspeaker cable with a total cross-section area of 2 x 3.94 mm² and a resistance of 2 x 1.4 Ohm/100 m.
The central ground lead is intended to serve as an optional ground connection between any amplifier and loudspeaker’s ground terminals.
Next to the signal lines’ star quad configuration and separate ground lead, additional protection against R.F. interference is provided by the cable’s heavy braided screen, which should be grounded at the amplifier side and be left disconnected at the loudspeaker end.

Having four signal lines, The INSPIRATION HYBRID is also suitable to be used as a bi-wiring or bi-amping loudspeaker cable;
(Total cross-section area: 4 x 1.97 mm²; Resistance: 4 x 2.8 Ohm/100 m).

Next to our standard sales units (see specifications below) The INSPIRATION HYBRID is also available on 50 m. reels fitted with end-caps to prevent any entrance of chemically polluted air.
Shipping: 1 x 50 m. reel in a 310 x 310 x 290 mm. box with a total shipping weight of 12.2 kg.
 

Specifications:

The INSPIRATION HYBRID
Cable Type: Screened 5 conductor
Conductor Material: FUSION TECHNOLOGY: amorphous Cu/Zn/Ag alloy + HYBRID: Linear Structured Carbon ® saturated layer(s)
Design Purpose / Application Area(s): Highest quality loudspeaker cable / Exotic DIY interconnect
Eff. Conductor Ø / Eq. AWG No. / Strands: Each signal lead: 1.97 mm² / ~AWG 14 / 98
Ground lead: 0.56 mm² / AWG 19.6 / 7
Screen: 4.45 mm² / AWG 10.7 / 252
External Diameter / -Dimensions: 11.5 mm.
Resistance (20 °C / 68 °F): Two red or blue signal leads combined: 1.4 Ohm/100 m.
Central ground lead: 3.2 Ohm/100 m.
Screen: 0.45 Ohm/100 m.
Capacitance: 318 pF/m.
Characteristic Impedance: -
Insulation / Dielectric Strength / Test Voltage: Cores: HULLIFLEX ® 4; Jacket: HULLIFLEX ® 4 / 300 Vrms min.
Connector Types Suitable: When combining leads into pairs (e.g. as twin lead speaker cable or at amplifier side of bi-wiring cable): Our 5.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors; Custom mountable on any length ordered;
For termination of individual leads: Our 3.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our DIY Screw-On Speaker Connectors; Both custom mountable on any length ordered.
Standard Sales Units / -Lengths: 50 m. reels; With connectors mounted to specifications: any length; Without connectors: please consult your van den Hul dealer or the van den Hul distributor in your country.

With connectors mounted the cable is also available in stereo pairs (i.e. two separate cables) in the following standard configurations:
  • Bi-amping configuration: Each of both cables having 4 connectors at the amplifier side and 4 connectors at the speaker side.
  • Bi-wiring configuration: Each of both cables having 2 connectors at the amplifier side and 4 connectors at the speaker side.
  • Normal wiring configuration: Each of both cables having 2 connectors at the amplifier side and 2 connectors at the speaker side.
Jacket Colour(s) Available: Gold tone
Remarks: Mounting:
  • When twin lead wiring a loudspeaker, the two internal red leads should be combined to form the loudspeaker + connection. Likewise, the two blue leads should be combined to form the loudspeaker – connection.
  • When bi-wiring or bi-amping a loudspeaker, the first red and blue conductor pair is used to connect one speaker section and the second red and blue conductor pair to connect the other speaker section.
  • When ordered with connectors mounted, The INSPIRATION HYBRID comes ready made with a ground lead at each side of the cable:
    At the cable end located in the direction of the “van” side of the “van den Hul” cable printing (i.e. at the amplifier side), both the cable shield and the cable’s central ground lead are connected together and exit as a ground lead, which is to be connected to the power amplifier뭩 dedicated ground terminal (or chassis). If it is impossible to connect this ground lead to any ground terminal (or chassis screw) at the amplifier, it can be connected to the amplifier뭩 – output terminal of the channel in question.
    At the cable end located in the direction of the “Hul” side of the “van den Hul” cable printing (i.e. at the loudspeaker side), the cable shield is left disconnected. Here only the cable’s central ground wire exits as a ground lead.
    If your loudspeakers are equipped with ground terminals, this ground lead should be connected to the speaker’s ground terminal of the channel in question.
    If your loudspeakers are not equipped with ground terminals, this ground lead should be left disconnected.

Our The SUPER NOVA is a heavier 4x(13.4 mm² / AWG 6) non Fusion Series relative of this cable.

    The Link between Technique and Emotion”

반덴헐은 기술과 감성의 결합이라는 슬로건을 내걸고  CEO인 van den hul 의 이름을 따서 20여년 전에 

 설립한 유럽 최고의 하이엔드 오디오업체입니다.

스피커 케이블, 인터커넥터, 카드리지 등 종합 오디오 메이커로서 여러 제품들이 수많은 상을 획득하였고

하이엔드의 위상을 굳건하게 지켜오면서 하이엔드업계의 선두주자에 위치하고 있습니다.

특히 탄노이 프레스티지라인 스피커의  내부 배선재로 사용되기도 하며, 여러 하이엔드 스피커의

배선재나 점퍼케이블의 선재로 반덴헐이 사용되고  있습니다.

반덴헐의 역사는 곧 HI-END의 역사입니다.

Related Articles & Papers:

  • “Van den Hul The INSPIRATION HYBRID”; A short product review of our The INSPIRATION HYBRID loudspeaker cable. Translated from German magazine Image HiFi, issue 3/’02.
  • “Van den Hul cables, TAKING A LEAD...”; This review discusses van den Hul’s The MAINSSTREAM (BS) HYBRID and The MAINSSERVER HYBRID 16 and 6 Ampere AC power cables as well as its Fusion Technology interconnect The INTEGRATION HYBRID and Fusion Technology speaker cable The INSPIRATION HYBRID. A review from Hi-fi News, November 2005.
  • FUSION TECHNOLOGY and The FUSION SERIES; A short paper introducing our newly developed highly advanced FUSION TECHNOLOGY conductor material which forms the basis of our new FUSION SERIES of loudspeaker and interconnect cable products.
  • Our unique CARBON & HYBRID TECHNOLOGY: In this interesting “question and answer styled” article A.J. van den Hul discusses the vulnerable properties of metal audio cables in general and goes into great detail about his newly developed HYBRID and LINEAR STRUCTURED CARBON ® audio cable technology. This article answers many important and often posed questions about van den Hul’s audio cable technology and philosophy.
  • Our CABLE FAQ: In this interesting and comprehensive “question and answer styled” document, A.J. van den Hul treats a wide field of frequently asked cable issues in high-end audio and video as well as many other related applications and subjects. A treasure of useful information for anyone dealing with cables in any hi-fi situation. Browsing through it will certainly give you new ideas and insights...
  • HI-FI TIPS AND HINTS: “Hear out your hi-fi system”; A.J. van den Hul has composed a collection of more than 100 useful hi-fi tips and hints helping to improve your sound quality at home. You most certainly will come across some practical ideas you had not thought of before...
  • Our AWG to METRIC conversion chart converts American Wire Gauge numbers to metric diameter, cross-section area and resistance. Some rules of thumb helping you to learn AWG resistance and diameter by head are included.
  • Hi-fi News & Record Review’s A VAN DEN HUL PROFILE interview, though dating from 1990, provides excellent background information on van den Hul’s patented LINE-CONTACT PHONO STYLUS, its invention and philosophy. Furthermore, van den Hul’s AUDIO CABLE PHILOSOPHY is discussed in detail.