VAN DEN HUL 반덴헐 PROFESSIONAL (HALOGEN FREE) RCA 인터케이블








*기본가격-1m가격


* RCA  인터 케이블


*호주 KLE 아이크만 뷸렛 순동단자


*Pabian Made


*원래 발란스 디지탈 케이블이지만 Acrolink 노더스트 등 유명 제조업체처럼 

 

두줄을 사용하면 인터케이블로도 사용가능한 다목적 케이블입니다.


*뛰어난 해상도 와 입체감 공간감이 아주 우수합니다.


*정확한  스펙과 뛰어난 구조로 디지탈케이블에 표준을 제시합니다.


*또한 4중레이어 구조로 간섭을 없애고 외부노이즈를 완벽하게 대응합니다.


아래는 VAN DEN HUL 반덴헐AES-EBU 110 OHM PROFESSIONAL (HALOGEN FREE) 설명입니다.










AES-EBU 110 OHM PROFESSIONAL (할로겐 프리)

AES-EBU위원회는 110 옴에서 전문 밸런스 디지털 신호 전송을위한 특성 임피던스를 설정했습니다. 이 범용 값은 전 세계적으로 전문적인 밸런스드 디지털 오디오 전송을위한 표준 임피던스로 인정됩니다. 이 요구 사항을 충족시키기 위해, 1990 년부터 우리 회사는 고품질의 110 Ohm 인터페이스 케이블을 설계하고 있습니다. 궁극적 인 결과는 우수한 디지털 신호 전송 품질을 제공하는 AES-EBU 110 Ohm 전문 케이블입니다.


이 케이블의 주요 설계 기준은 다음과 같습니다.


안정되고 정밀한 110 Ohm 전송선 임피던스를 제공합니다.

매우 높은 주파수 대역폭과 최소한의 신호 감쇄를 제공합니다.

외부 전자기장으로 인한 간섭에 대해 매우 높은 차폐 계수를 제공합니다.

오염 된 공기 또는 기계적 원인과 같은 외부 요인에 의한 재료 열화 방지.

세부:


AES-EBU 110 Ohm Professional의 내부 평형 구조는 고순도 고밀도은 코팅 고순도 정합 크리스탈 Oxygen Free Copper (OFC)로 만들어진 0.75 mm 솔리드 코어 리드로 구성된 솔리드 코어 중심 도체 두 개를 포함합니다.

각 리드는 4.0 Ohm / 100 미터의 저항을 나타냅니다.

두 리드 사이의 커패시턴스는 매우 낮습니다 : 47pF / m.

두 개의 중심 도체의 각각의 적색 및 투명 절연은 고밀도 폴리에틸렌으로 만들어지며, 고밀도 실버 코팅과 함께 외부 기계 및 부식 노화 요인에 대한 추가 보호 기능을 제공합니다.


안정되고 정밀한 110 Ohm 전송선 임피던스를 제공하기 위해 중심 도체의 고밀도 폴리에틸렌 절연체와 약 60 mm의 가벼운 결합은 견고한 평형 선 구조를 유지합니다. 또한, 특수 처리 된 섬유는 내부 필러로 사용됩니다. 이들은 지오메트리를 더욱 안정화시키고 습기 침투 및 결과로 생기는 임피던스 편차 또는 전송 손실에 케이블을 둔감하게합니다.


 참고 : 일정한 110 Ohm 임피던스를 유지하고 신호 반향을 피하기 위해 AES-EBU 110 Ohm Professional에 대한 권장 최소 굽힘 반경은 8.0 cm입니다. 110 Ohm 임피던스를 가깝게 유지함으로써 AES-EBU 110 Ohm Professional은 인터페이스 유도 지터를 최소로 유지합니다. Sonically 한 결과는 동일한 전송 링크에서 다른 AES-EBU 표준화 제품과 직접 비교하여 훨씬 깨끗한 재생 아날로그 신호를 만들어냅니다.


정확한 데이터 전송과 낮은 지터 클럭 복구를 지원하는 AES-EBU 110 Ohm Professional은 매우 높은 주파수 대역폭을 특징으로합니다. 예 : 10m의 -3dB 대역폭. 잘 뛰면 300 MHz를 초과합니다.


AES-EBU 110 Ohm Professional의 케이블 스크린은 4 개의 레이어로 구성됩니다.

고밀도의 순수한은 코팅이있는 120 개의 고급 OFC 와이어의 브레이드 아래에있는 알루미늄 테이프,

이것은 다른 알루미늄 테이프와 Linear Structured Carbon® (LSC) 포화 외부 층 아래에 ​​있습니다.

결합 된 스크린의 저항은 0.81ohm / 100m입니다.

이 4 중 차폐는 무선 주파수 및 기타 전자기 간섭에 대한 탁월한 내성을 제공하므로 문제가없는 큰 길이의 사용이 가능합니다. 다른 케이블 (예 : 케이블 도관)에서도 상호 간섭의 위험없이 여러 길이를 병렬로 실행할 수 있습니다.


AES-EBU 110 Ohm Professional의 8.0 mm. 외경 진한 빨간색 외부 재킷은 당사의 PVC 및 할로겐 프리 HULLIFLEX®로 만들어졌습니다. 이 견고한 절연 재료는 탁월한 기계적 견고성과 외부 세계로부터의 화학적 (부식성) 공격에 대한 최적의 보호 기능을 결합하고 매우 긴 수명을 보장합니다.


또한 금도금 된 Neutrik 특수 디지털 오디오 XLR 커넥터를 사용하면이 케이블의 우수한 품질에 기여할 수 있습니다.


AES-EBU 110 Ohm Professional은 탁월한 성능을 제공하기 위해 모든 기술을 갖추고 있으며 특히 더 먼 거리의 디지털 오디오 연결 (예 : 스튜디오 배선)에 적합합니다.


모든 AES-EBU 디지털 오디오 어플리케이션에서 가장 깨끗한 신호 전달을 제공하는 AES-EBU 110 Ohm Professional은 전문적이고 중요한 오디오 파일을위한 최고의 선택입니다.





The AES-EBU committee has set the characteristic impedance for professional balanced digital signal transmission at 110 Ohm. World-wide this typical value is accepted as the standard impedance for professional balanced digital audio transfer. To meet this requirement, already since 1990 our company has been designing high quality balanced 110 Ohm interface cables. The ultimate result is our AES-EBU 110 Ohm Professional cable which provides a superior digital signal transmission quality.

The major design criteria with this cable have been:





  • To provide a stable and precise 110 Ohm transmission line impedance.
  • To provide a very high frequency bandwidth as well as minimal signal attenuation.
  • To provide a very high shielding factor against interference due to external electromagnetic fields.
  • The prevention of material deterioration brought about by external factors, like polluted air or mechanical causes.

Details:

  • The AES-EBU 110 Ohm Professional’s internal balanced construction contains two solid core centre conductors each consisting of a 0.75 mm solid core lead, made of high purity dense silver coated high purity matched crystal Oxygen Free Copper (OFC). 
  • Each lead exhibits a resistance of 4.0 Ohm/100 meter. 
  • The capacitance between both leads is very low: 47 pF/m. 
  • The two centre conductors’ respective red and transparent insulation is made of dense polyethylene, which together with their dense silver coating provides extra protection against external mechanical and corrosive aging factors.





To provide a stable and precise 110 Ohm transmission line impedance, the centre conductors’ combined dense polyethylene insulation and mild 60 mm lay maintains a solid balanced line geometry. In addition, specially treated fibres are used as internal fillers. These act to further stabilise the geometry and furthermore render the cable insensitive to humidity penetration and any resulting impedance deviations or transmission losses.

 Note:  To maintain a constant 110 Ohm impedance and avoid signal reflections, the advised minimum value of bending radius for the AES-EBU 110 Ohm Professional is 8.0 cm. By maintaining a close tolerance 110 Ohm impedance, the AES-EBU 110 Ohm Professional keeps interface induced jitter to a minimum. Sonically this results into a much cleaner reproduced analog signal in direct comparison to other AES-EBU standardised products in the same transmission link.




Supporting accurate data transmission and low-jitter clock recovery, the AES-EBU 110 Ohm Professional furthermore features a very high frequency bandwidth. As an example: The -3 dB bandwidth of a 10 m. run well exceeds 300 MHz.

The AES-EBU 110 Ohm Professional’s cable screen consists of four layers: 

  • an aluminum tape beneath a braid of 120 high grade OFC wires with a dense pure silver coating, 
  • this beneath another aluminum tape and a Linear Structured Carbon ® (LSC) saturated outer layer. 
  • The resistance of the combined screens is 0.81 Ohm/100 meter.
This quadruple shielding provides supreme immunity against radio frequency and other electromagnetic interference, allowing trouble-free use of large lengths. Multiple lengths can be run in parallel without risk of mutual interference, even with other cabling (e.g. in cable conduits).

The AES-EBU 110 Ohm Professional’s 8.0 mm. external diameter dark red outer jacket is made of our PVC and Halogen Free HULLIFLEX ®; this rugged insulation material combines excellent mechanical robustness with an optimal protection against chemical (corrosive) attack from the outside world and ensures a very long lifespan.

In addition, the use of gold-plated Neutrik special digital audio XLR connectors contributes to the good quality of this cable.

The AES-EBU 110 Ohm Professional has all the technology on board for exceptional performance without compromise and is especially suited for digital audio connections over greater distances (e.g. studio wiring).

Providing the cleanest possible signal transport in all AES-EBU digital audio applications, the AES-EBU 110 Ohm Professional is the ultimate choice for the professional and critical audiophile.

The AES-EBU 110 Ohm Professional is available: